You can use up to 3 additional cameras with your trailerCam solution. We recommend that you pair the camera with your monitor before mounting it on your machine.
Pairing camera and monitor
- Connect the camera to a power source according to the instructions in on page 7.
- On the monitor, click the PAIR/CH button and go to the channel where you wish to install your camera.
- Press and hold the PAIR/CH button until the numbers start counting down.
- Within the 60 second countdown, press and hold the button on the back of the camera until the text “SAVE DATA” is shown.
- Mount the camera in the desired position after making sure the signal strength is good enough.
Switching between the cameras on the monitor