FAQ

  • Can I record the video?
    • Yes, if you insert a micro SD card into the monitor. See the “Installing an SD card” and “Menu options/Record” sections.
  • How do I get the camera to auto pair with the monitor?
    • The trick is to wait until the pairing countdown is shown and then connect the power to the camera. If the power is already on it won’t auto pair. If it’s not practically possible for you to turn the camera power on during the countdown, press the pair button next to the camera antenna instead, using a pen or a paper clip.
  • Can I move the system between different machines?
    • Yes, if you are using the cigarette power outlet for the monitor, and the FlexiPack X battery for the camera, the system is completely flexible and can be freely moved between machines within a few minutes.
  • Is the camera water resistant?
    • Yes, it is IP69K classed which means it can be placed outside exposed to the weather and even cleaned using a pressure washer.
  • Can I use more than one monitor with the same camera?
    • No, that is not possible.
  • Can I use more than one camera to the monitor?
    • Yes, you can have up to 4 cameras connected to the same monitor.
  • Should the extended antenna be used with the monitor or the camera?
    • The extended magnetic antenna (art. no. 5027) fits with both the camera and the monitor. However, placing the antenna on the transmitting (camera) side will give a better effect.
  • Why does the frame rate sometimes drop when I’m driving?
    • This occurs as the signal reception is depending on the surroundings. You can improve the general signal reception by using a larger antenna.
  • Will the camera break at very low temperatures?
    • No, at extremely low temperatures the camera might turn off, but it will regain its functionality when the temperature goes higher again.
  • Can I loop the channels in split screen mode?
    • No, that is not possible.
  • Further questions?